수리 들어간 r9 fury x 올 때 까지 5웨이로 돌려야지 하다가 어제 파워칼라 rx580 8gb oc 중고 물건이 적절한 가격에 떠서 이왕이면 6웨이! 하고 세팅 했는데 안되네요. 윈도우 진입하고 나면 5개만 인식 됩니다.
다운그레이드 시킨 바이오스 에서는 cmos에서 연결상태를 확인할 수 없어서 이래저래 꽂아봤는데 라이져 카드나 중고로 구매한 카드 자체 문제인가 해서 바꿔 봤는데 정상이네요.
바이오스 업데이트를 시도해 보니 이제는 4개만 인식됩니다.
해외 포럼 뒤지다가 찾아보니까 amd 공식 드라이버는 최대 5개 까지만 보드가 인식 한다네요. 6웨이 인식 시키는 방법도 있던데 구 드라이버를 신 드라이버처럼 인식 시키는 방법인데 내일 시도해 보고 안되면 보드 갈아야 겠어요...
Nope - bigger issue. According to Biostar re: B350 BTC MOBO - official AMD driver for RX580 has a limit for 5 GPU, so if you are going with Ryzen's you may need to rethink your GPU.
----------------------------------------------------------------------------------------------------------------------
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked .
1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.
-------------------------------------------------------------------------------------------------------------------------
https://bitcointalk.org/index.php?topic=1845397.0
-------------------------------------
꼬리말
* 게시글 내용 삭제시 레벨 강등
* 질문은 각 주제별 게시판에.
비트코인 암호화화폐 커뮤니티 땡글~ 땡글~
-------------------------------------