이제 ETH 하드포크도 안남았고, 채굴량도 줄고,
채굴 방법을 다양화 해야 할 것 같습니다.
https://www.coincalculators.io/
에서 계산해 보면, 가끔 Energi(NRG) 가 상위에 올라오는 경우가 있는데, 채굴해 보실분은 참고 하세요.
제 전략은 상위 채굴, 원하는 코인으로 거래 하거나, 현금화 전략 입니다.
채굴 ETH 보다 상위에 링크 되어 있는 코인들은 번갈아 가며 상위 링크 되는 군요.
BCD, SUQA, RVN, BCI, BTX, X16R 채굴방법은 아래 링크 참고 하세요.
https://www.ddengle.com/mining/10336518
코인 : Energi(NRG)
알고리즘 : EnergiHash
GPU : AMD, NVIDIA 4G 이상 메모리가 필요(아쉽게도 1060 3G는 안돼요. ㅠ.ㅠ)
드라이버 : OpenCL 1.2+, CUDA 9
가상메모리 : ETH 보다 더 많은 가상 메모리를 요구 합니다.
해시 : ethash 와 같다고 보시면 됩니다.
1. 채굴 프로그램 다운로드(전용 프로그램)
AMD, NVIDIA 모두 채굴 가능 합니다.
https://www.energi.world/downloads/
2. 지갑/거래소
https://wallet.crypto-bridge.org/
에서 거래 가능 합니다.
3. 풀
https://mining.energi.network/
https://guard-energi.minecrypto.pro/ (suprnova 스타일의 관리 페이지)
채굴 풀해시 파이 링크
https://www.crypto-coinz.net/recommended-crypto-pools-for/?205-Energi-NRG-EnergiHash-mining-pools/
좋은 추천 풀 좀 댓글 남겨 주세요~~~ ^^;
4. 채굴 방법
https://mining.energi.network/ 풀에서 마이닝
NVIDIA
energiminer.exe "stratum://지갑주소.워커@asia.mining.energi.network:3110" -U
AMD
energiminer.exe "stratum://지갑주소.워커@asia.mining.energi.network:3120" -G
http://energi.zzpools.xyz/ 풀에서 마이닝
NVIDIA
energiminer.exe "stratum://지갑주소.워커@energi.zzpools.xyz:3333" -U
AMD
energiminer.exe "stratum://지갑주소.워커@energi.zzpools.xyz:3333" -G
https://guard-energi.minecrypto.pro/ 풀에서 마이닝
NVIDIA
energiminer.exe stratum://Weblogin.WorkerName:WorkerPassword@stratum.nrg.minecrypto.pro:9999 -U --response-timeout 10 --cuda-block-size 256 --cuda-grid-size 4096 --cuda-parallel-hash 8
AMD
energiminer.exe stratum://Weblogin.WorkerName:WorkerPassword@stratum.nrg.minecrypto.pro:9999 -G --response-timeout 10 --cl-local-work 256 --cl-global-work 4096 --cl-parallel-hash 8
NVIDIA 채굴
AMD 채굴
5. 내용 추가
위 명령으로 에러를 내는 경우가 있는데, 이 때는
energiminer.exe --list-devices
로 GPU 를 확인 합니다.
platformID 와 deviceID 를 확인 한 후 해당 GPU만 채굴 하도록 합니다.
위 화면에서 보여지는 platformID [1] 만 채굴 하도록 합니다.
energiminer.exe "stratum://지갑주소.워커@asia.mining.energi.network:3120" -G --opencl-platform=1
자세한 내용은 아래 링크 참고
https://www.energi.world/mining/
energiminer 사용 설명 입니다. 추가 옵션 참고 하세요.
energiminer - GPU energiminer miner
Usage: energiminer.exe [OPTIONS] [protocol...]
Positionals:
protocol TEXT ... Specify one or more pool URLs. See below for URL syntax
Common Options:
-h,--help Show help
-V,--version Show program version
-v,--verbosity INT=5 Set log verbosity level
--farm-recheck UINT=500 Set check interval in ms.for changed work
--farm-retries UINT=3 Set number of reconnection retries
--work-timeout INT=240 Set disconnect timeout in seconds of working on the same job
--response-timeout INT=4 Set disconnect timeout in seconds for pool responses
--display-interval UINT=5 Set mining stats log interval in seconds
--HWMON UINT 0 - Displays gpu temp, fan percent. 1 - and power usage. Note for Linux: The program uses sysfs for power, which requires running with root privileges.
--exit Stops the miner whenever an error is encountered
-P,--protocol TEXT ... Specify one or more pool URLs. See below for URL syntax
--failover-timeout UINT=0 Set the amount of time in minutes to stay on a failover pool before trying to reconnect to primary. If = 0 then no switch back.
--nocolor Display monochrome log
--syslog Use syslog appropriate log output (drop timestamp and channel prefix)
--list-devices List the detected OpenCL/CUDA devices and exit. Should be combined with -G, -U, or -X flag
--noeval Bypass host software re-evaluation of GPU solutions
-L,--dag-load-mode UINT=0 Set the DAG load mode. 0=parallel, 1=sequential, 2=single. parallel - load DAG on all GPUs at the same time sequential - load DAG on GPUs one after another. Use this when the miner crashes during DAG generation single - generate DAG on device, then copy to other devices. Implies --dag-single-dev
--dag-single-dev UINT=0 Set the DAG creation device in single mode
--benchmark-warmup UINT=15 Set the duration in seconds of warmup for the benchmark tests
--benchmark-trial UINT=3 Set the number of benchmark trials to run
-G,--opencl When mining use the GPU via OpenCL
-U,--cuda When mining use the GPU via CUDA
-X,--cuda-opencl When mining with mixed AMD(OpenCL) and CUDA GPUs
-M,--benchmark UINT=0 Benchmark mining and exit; Specify block number to benchmark against specific DAG
-Z,--simulation UINT=0 Mining test. Used to validate kernel optimizations. Specify block number
--tstop UINT=0 Stop mining on a GPU if temperature exceeds value. 0 is disabled, valid: 30..100
--tstart UINT=40 Restart mining on a GPU if the temperature drops below, valid: 30..100
--coinbase-addr TEXT Coinbase address
OpenCL Options:
--opencl-platform UINT=0 Use OpenCL platform n
--opencl-device,--opencl-devices UINT ...
Select list of devices to mine on (default: use all available)
--cl-parallel-hash UINT in {1,2,4,8}=8
Ignored. Backward compatibility
--cl-global-work INT=16384 Set the global work size multipler. Specify negative value for automatic scaling based on # of compute units
--cl-local-work UINT=128 Set the local work size
--cl-only Use opencl kernel. Don't attempt to load binary kernel
CUDA Options:
--cuda-grid-size UINT=16384 Set the grid size
--cuda-block-size UINT=128 Set the block size
--cuda-devices UINT ... Select list of devices to mine on (default: use all available)
--cuda-parallel-hash UINT in {1,2,4,8}=4
Set the number of hashes per kernel
--cuda-schedule TEXT in {auto,spin,sync,yield}=sync
Set the scheduler mode. auto - Uses a heuristic based on the number of active CUDA contexts in the process C and the number of logical processors in the system P. If C > P then yield else spin. spin - Instruct CUDA to actively spin when waiting for results from the device. yield - Instruct CUDA to yield its thread when waiting for results from the device. sync - Instruct CUDA to block the CPU thread on a synchronization primitive when waiting for the results from the device.
--cuda-streams UINT=2 Set the number of streams
Pool URL Specification:
URL takes the form: scheme://user[:password]@hostname:port
where scheme can be any of :
getwork for getWork mode
stratum for stratum mode
stratums for secure stratum mode
stratumss for secure stratum mode with strong TLS12 verification
Example 1: stratum://EbD5YRX1Q3mG73ihRJtJpsqBmWn42sygcy@<host>:<port>
Environment Variables:
NO_COLOR - set to any value to disable color output. Unset to re-enable color output.
SYSLOG - set to any value to strip time and disable color from output, for logging under systemd
-------------------------------------
꼬리말
* 게시글 내용 삭제시 레벨 강등
* 질문은 각 주제별 게시판에 적어주세요.
비트코인 암호화화폐 커뮤니티 땡글~ 땡글~
-------------------------------------