xmr-stak-nvidia 실행하면
JSON config parse error<offset 2>: Missing a name for object member. 뜨네요
제 설정입니다 뭐가 틀렷는지 아는분 좀알려주세요 ㅠㅠ
* GPU configuration. You should play around with threads and blocks as the fastest settings will vary.
* index - GPU index number usually starts from 0.
* threads - Number of GPU threads (nothing to do with CPU threads).
* blocks - Number of GPU blocks (nothing to do with CPU threads).
* bfactor - Enables running the Cryptonight kernel in smaller pieces.
* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 8
* bsleep - Insert a delay of X microseconds between kernel launches.
* Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 100
* affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.
*
* On the first run the miner will look at your system and suggest a basic configuration that will work,
* you can try to tweak it from there to get the best performance.
*
* A filled out configuration should look like this:
* "gpu_threads_conf" :
* [
* { "index" : 0, "threads" : 17, "blocks" : 60, "bfactor" : 0, "bsleep" : 0, "affine_to_cpu" : false},
* ],
*/
"gpu_threads_conf" :
[
{ "index" : 0, "threads" : 32, "blocks" : 27, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false},
],
/*
* TLS Settings
* If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
* to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
*
* use_tls - This option will make us connect using Transport Layer Security.
* tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
* tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
*/
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
/*
* pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
* wallet_address - Your wallet, or pool login.
* pool_password - Can be empty in most cases or "x".
*/
"pool_address" : "asia.monero.miningpoolhub.com:20580",
"wallet_address" : "z1004",
"pool_password" : "x",
/*
* Network timeouts.
* Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
* sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
* nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
* long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
* server usually takes to process our calls.
*
* call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
* retry_time - How long should we wait before another connection attempt.
* Both values are in seconds.
* giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
* don't mine while the connection is lost, so your computer's power usage goes down to idle.
*/
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,
/*
* Output control.
* Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
* really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
* performance monitors, there is very little reason to spew out pages of text instead of concise reports.
* Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
*
* verbose_level - 0 - Don't print anything.
* 1 - Print intro, connection event, disconnect event
* 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
* 3 - All of level 1, and new job (block) event in all cases, result submission event.
* 4 - All of level 3, and automatic hashrate report printing
*/
"verbose_level" : 4,
/*
* Automatic hashrate report
*
* h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
* This option has no effect if verbose_level is not 4.
*/
"h_print_time" : 60,
/*
* Output file
*
* output_file - This option will log all output to a file.
*
*/
"output_file" : "",
/*
* Built-in web server
* I like checking my hashrate on my phone. Don't you?
* Keep in mind that you will need to set up port forwarding on your router if you want to access it from
* outside of your home network. Ports lower than 1024 on Linux systems will require root.
*
* httpd_port - Port we should listen on. Default, 0, will switch off the server.
*/
"httpd_port" : 0,
/*
* prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
* This setting will only be needed in 2020's. No need to worry about it now.
*/
"prefer_ipv4" : true,
-------------------------------------
꼬리말
* 게시글 내용 삭제시 레벨 강등
* 질문은 각 주제별 게시판에.
비트코인 암호화화폐 커뮤니티 땡글~ 땡글~
-------------------------------------