amd 사용자중에 HDAC을 채굴하고 싶으나 마이너에 대한 정보가 없어보여 이글을 작성합니다.
https://bitcointalk.org/index.php?topic=2360168.0 들어가서 mkxminer를 다운 받습니다
mkxminer 다운로드 주소 : https://nofile.io/f/GQ1jSYbAODC/mkxminer310.zip
[링크를 차지 못하시는 분들이 있어 추가 드립니다.]
화면을 쭉 내리시다 보면 아래 링크가 보입니다.
다운을 받은후 압축을 풀면 여러 파일이 보일 텐데 폴더 안에 있는 배치파일을 사용하지 마시고
새로운 배치 파일을 만들어서 사용합니다.
배치파일을 만들지 모른 분도 계실 것같아 간단하게 만드는 방법도 적겠습니다.
먼저 메모장을 열고 다음과 같이 파일을 작성하고 자신이 원하는 채굴풀 하고 지갑 주소를 작성하여 넣어주시면 됩니다.
PS. 배치 명령어에 --asm 넣으면 오류가 나시는 분이 있다고 하네요. 참고해주세요
mkxminer.exe --asm -o stratum+tcp://풀주소:포트주소 -u HGMxPwxr2xgTFy2J26e2dHstM8XYRS6igY -p x -I 23
그리고 파일 다른이름으로 저장하기 누른후
이름은 start.bat 으로 작성하여 mkxminer 압축풀어놓은 폴더에 저장을 합니다.
그리고 배치파일으 실행하며 amd도 hdac을 채굴 가능합니다.
참고로 배치 파일중 '-l 23' 부분을 적절히 조정하여 사용하셔야 합니다.
miner 설명에서 보면 하이엔드 그래픽카드는 23정도로 하고 나머지는 20정도 하라고 나와있네요.
최대 23까지만 해주세요 저도 24만 되도 꺼져버리네요 ㅠㅠ
-I or --intensity - Intensity of GPU scanning (23 for high end cards, 20 for low end)
성굴하세요. 엠당 파이팅 ㅎㅎ
=== Speeds (no overclocking)
Radeon Pro Duo: 84.8MHs (42.4 + 42.4)
FuryX: 55MHs
Vega56: 53MHs
RX 580: 39MHs
RX 480: 36MHs
R9 390: 32MHs
R9 380X: 26MHs
R9 280X: 26MHs
=== Options
-o or --url - URL of the stratum server (ex: stratum+tls://stak.suprnova.cc:7710)
You can currently only specify one pool, no backups supported.
-u or --user - Username for stratum server
-p or --pass - Password for stratum server
-d or --device - Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
-I or --intensity - Intensity of GPU scanning (23 for high end cards, 20 for low end)
--exitsick - Exit miner if one of GPUs becomes sick (so that you can create a script to restart app / reboot PC)
--asm - Will enable ASM kernels for supported GPUs (Fiji, Ellesmere, Tonga, Hawaii, Tahiti, Oland currently)
for about 10% extra speed. Note: this may crash your miner, especially on some Ellesmere cards.
Recommended 16.10.3 driver or latest AMD / beta blockchain driver.
--platform - Select OpenCL platform ID to use for GPU mining
--engine - GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
--fan - GPU fan percentage range - one value, range and/or comma separated list (e.g. 0-85,85,65)
--map - Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
--memclock - Set the GPU memory (over)clock in Mhz - one value for all or separate by commas for per card
--powertune - Set the GPU powertune percentage - one value for all or separate by commas for per card
--reorder - Attempt to reorder GPU devices according to PCI Bus ID
--vddc - Set the GPU voltage in Volts - one value for all or separate by commas for per card
--auto-fan - Automatically adjust all GPU fan speeds to maintain a target temperature
--auto-gpu - Automatically adjust all GPU engine clock speeds to maintain a target temperature
--temp-cutoff - Temperature which a device will be automatically disabled at, one value or comma separated list
--temp-overheat - Temperature which a device will be throttled at while automanaging fan and/or GPU, one value or comma separated list
--temp-target - Temperature which a device should stay at while automanaging fan and/or GPU, one value or comma separated list